User manual

171
4.2.5.3 Advanced ACL
The description below applies to non Intel-based NAS models running firmware version
3.3.0 or later and Intel-based NAS models running firmware version 3.2.0 or later only.
You can create LUN masking policy to configure the permission of the iSCSI initiators
which attempt to access the LUN mapped to the iSCSI targets on the NAS. To use this
feature, click “Add a Policy” under “Advanced ACL”.
Enter the policy name, the initiator IQN, and assign the access right for each LUN
created on the NAS.
Read-only: The connected initiator can only read the data from the LUN.
Read/Write: The connected initiator has read and write access right to the LUN.
Deny Access: The LUN is invisible to the connected initiator.