User manual

18
LED
Colour
LED Status
Description
3) The hard disk drive is not formatted.
Green
The NAS is ready.
Off
All the hard disk drives on the NAS are in
standby mode.
LAN
Orange
Orange
The disk data is being accessed from the
network.
Flashes orange
The NAS is connected to the network.
10
GbE*
Green
Green
The 10GbE network expansion card is
installed.
Off
No 10GbE network expansion card is
installed.
HDD
Red/
Green
Flashes red
The NAS is being accessed from the
network.
Red
A hard drive read/write error occurs.
Flashes green
The disk data is being accessed.
Green
The hard drive can be accessed.
USB
Blue
Flashes blue every
0.5 sec
1) A USB device (connected to front
USB port) is being detected.
2) A USB device (connected to front
USB port) is being removed from the
NAS.
3) The USB device (connected to the
front USB port) is being accessed.
4) The data is being copied to or from
the external USB or eSATA device.
Blue
A front USB device is detected (after the
device is mounted).
Off
1) No USB device is detected.
2) The NAS has finished copying the
data to or from the USB device
connected to the front USB port of
the NAS.