User manual

726
Using Surveillance Station
Click the service link on “Control Panel” > “Applications” > “Station Manager” >
“Surveillance Station” to connect to the application. Enter the username and password
when you are prompted to.
Note: For live view and playback, the Surveillance Station supports the following
platforms:
Windows PC: 32-bit Internet Explorer version 9.0 or above, Google Chrome, or
Mozilla Firefox
Mac OS X: QNAP Surveillance Client for Mac (http://www.qnap.com/utility)
To set up your network surveillance system by the NAS, follow the steps below:
1. Plan your home network topology
2. Set up the IP cameras
3. Configure the camera settings on the NAS
4. Configure your NAT router (for remote monitoring over the Internet)