User manual

2. Product Overview
This chapter provides basic information about the QNAP TS-431X2 NAS.
About the TS-431X2
The TS-431X2 supports four drives and comes with a built-in 10GbE SFP+ port to support 10GbE network
environments. Equipped with a strong encryption engine, the TS-431X2 provides a secure and reliable quad-
core NAS solution. The TS-431X2 is a cost-effective network storage solution designed for growing
businesses looking for backup, restoration, private cloud, storage for virtualization, and to future-proof their
IT infrastructure for 10GbE networks.
Hardware Specifications
Important
Modifying the hardware or software of your QNAP product invalidates the warranty. QNAP
is not responsible for any damage or data loss caused by unauthorized modifications and
installation of unsupported third-party applications.
Component TS-431X2
Ordering P/N • TS-431X2-2G
• TS-431X2-8G
Drive bays 4 x SATA 6Gb/s
Drive compatibility • 3.5-inch hard disk drives
• 2.5-inch hard disk drives
• 2.5-inch solid state drives
CPU
AnnapurnaLabs Alpine AL-314 quad-core ARM
®
Cortex-A15 1.7 GHz
Encryption engine AES 256-bit
Memory TS-431X2-2G
• 2 GB DDR3 (1 x 2 GB)
TS-431X2-8G
• 8 GB DDR3 (1 x 8 GB)
Maximum memory 8 GB (1 x 8 GB)
Memory slots 1 x SODIMM DDR3
Flash memory 512 MB
10 gigabit Ethernet ports 1 x 10 Gigabit SFP+
Gigabit Ethernet ports 2 x Gigabit
USB ports • Front: 1 x USB 3.0 port
• Rear: 2 x USB 3.0 ports
Buttons • Power
• USB One Touch Copy
• Reset
TS-431X2 User Guide
Product Overview 4