User Manual

101

Managing the encryption key

To change the encryption password or download an encryption key file, click "Encryption

Management".

Select "Manage encryption key". Click "Next".

Select to change the encryption password or download the encryption key file to the local

PC.

Data Sharing

Select one of the following settings for an external storage device connected to a 1-bay NAS:



Data sharing: Use the external drive for storage expansion of the NAS.



Q-RAID 1: Configure the external drive and a local hard drive on the NAS as Q-RAID 1.

Q-RAID 1 enables one-way data synchronization from the NAS to the external storage

device but does not offer any RAID redundancy.

Note that the external drive will be

formatted when Q-RAID 1 is executed.

After Q-RAID 1 has been executed once, the NAS data will be automatically copied to the

external storage device whenever it is connected to the NAS.

Note:



Only one external drive can be set as Q-RAID 1 at one time.



The maximum capacity supported by Q-RAID 1 is 2TB.



It is recommended to use an external storage device with the same capacity as the

internal NAS drive. If the storage capacity of the external storage device is too small to

synchronize with the internal hard drive, the device can only be used for data sharing.



HD Station will reboot when external devices are unmounted.