User Manual

155

FTP

Go to "Control Panel" > "Network Services" > "FTP" to Configure the FTP server.

FTP Service

When you enable the FTP service, you can specify the port number and the maximum

number of users that are allowed to connect to the NAS by FTP at the same time. To use the

FTP service of the NAS, enable this function. Open an IE browser and enter ftp://NAS IP.

Enter the username and the password to login the FTP service.



Protocol Type:

Select to use standard FTP connection or SSL/TLS encrypted FTP. Select

the correct protocol type in your client FTP software to ensure successful connection.



Port number:

Specify the port number of the FTP service.



Unicode Support:

Toggles Unicode support. The default setting is No. If your FTP client

does not support Unicode, it is recommended to disable this option and select the

specified language in "General Settings" > "Codepage" so that the file and folder names

can be correctly displayed. If your FTP client supports Unicode, enable this option for

both your client and NAS.



Enable Anonymous:

Enable this option to allow anonymous access to the NAS by FTP.

Anonymous users can connect to files and folders which are open for public access. If

this option is disabled, users must enter an authorized username and password to

connect to the NAS.



Connection:

Enter the maximum number of allowed FTP connections for the NAS and a

single account and check "Enable FTP transfer limitation" to specify the maximum upload