User Manual

187
o PAP: The password will not be encrypted.
o CHAP: The password will be encrypted using CHAP.
5. If you choose MS-CHAP or MS-CHAPv2, go to the "Encryption" menu and select an option:
o None: The VPN connection will not be encrypted.
o Medium (AES 40/128 bit): The VPN connection will be encrypted using a 40-bit or 128-bit key.
o High (AES 256 bit): The VPN connection will be encrypted using a 256-bit key (the highest-possible
level.)
6. Specify the subnet mask.
7. Select any of the following options, as required:
o Use the default gateway on remote network: This will allow all packets to be transferred via the VPN
server.
o Allow other network devices to connect to the VPN through the NAS: This will allow network devices
on the same LAN as the NAS to connect to the same VPN.
o Reconnect when the VPN connection is lost: This will automatically reconnect to the VPN server
when the connection is lost.
8. Select "Create" to start.
Note: To connect to a VPN server using domain user accounts, you must enable the
service in Domain Security.