User Manual

199
Target folder for version control
You can apply the version control to the files under specific Qsync folders to save space. To
assign specific folders, select "Assign specific subfolder under the Qsync folder", then click
"Add" to add folders. You can add up to 5 folders. Click "Delete" to remove all versions
under the selected folders and subfolders. This will not take effect until you click "Apply" or
"Apply All".
Advanced
Maximum Number of Versions: You can choose how many versions you want to retain. This
is a control only for administrators. The more versions you keep the more storage space will
be taken up. To know how much space has been used for version control, click "Check" in
the "Disk Used for Version Control" section.
Note:
 If you reduce the maximum number of versions, it will impact the versions that have
been created and if the volume of versions exceeds the new settings, the earlier
versions will be dropped. Only the equivalent number of latest versions as of the new
settings will be kept.
 The deletion will only take effect after you click "Apply" or "Apply All".
 The maximum number of versions supported for Version Control is 64.
Managing or Monitoring Qsync Status via Web Browser
Log into the NAS via web browser and click Qsync Central.
1. Overview: This page shows the mode of use management (User Customization Mode or
Central Configuration Mode) and the total number of online users and devices. It also
provides links to File Station and for installing Qsync. In addition, you can enable or
disable the Qsync service (for administrators only.)
2. Management settings: This provides a centralized management for administrators to edit
Qsync Client default settings. For details on the management settings, please refer to the
Using Centralized Mode for Centralized Management section.
3. Users: Lists the information of online users, and you can manage the users of Qsync
service here (for administrators only.)
4. Devices: This table lists the status of connected devices. It also provides options for you
to manage each device, allowing you to edit their settings, block them, or to remotely
erase them.
a. If users log in from their PC, the name of the device will be shown as their computer
name.