User Manual
32
Source NAS
Destination NAS
Model
Firmware
Version
Model
Firmware
Version
TS-x28, TS-x31/x31+,
TS-431U,
HS-251/251+,
TS-x51/x51+, TS-x53,
SS-x53
4.1.x and later
TS-x10, TS-x12, TS-x19,
TS-x20, TS-x21, HS-210,
TS-x39, TS-509, TS-809,
SS-x39, TS-x59,
TS-x59U, TS-x69,
TS-x69U, TS-x70,
TS-x70U, TS-x79,
TS-x79U
3.8.x and older
4.0.2
TS-x69, TS-x69U,
TS-x70, TS-x70U,
TS-x79, TS-x79U
4.0.5
4.1.x
TS-x10, TS-x12, TS-x19,
TS-x20, TS-x21, HS-210,
TS-x39, TS-509, TS-809,
SS-x39, TS-x59,
TS-x59U, TS-x69,
TS-x69U, TS-x70,
TS-x70U, TS-x79,
TS-x79U
3.8.x and older
4.0.2
TS-x28, TS-x31/x31+,
TS-431U, HS-251/251+,
TS-x51/x51+, TS-x53,
SS-x53
4.0.5
4.1.1 and older
TS-x28,
TS-x31+/x51/x53
4.1.2 and later
TS-x31
4.1.x
Note:
The destination NAS should contain enough drive bays to house the hard drives of the source
NAS.
Users are encouraged to only use drives that are compatible with the NAS before system
migration or the data may be inaccessible. For a compatibility list, go to
http://www.qnap.com/compatibility.
Encrypted disk volumes cannot be migrated to a NAS that does not support file system
encryption.