User Manual

Advanced ACL

Note: The following information only applies to ARM-based NAS models with firmware version

3.3.0 or later and x86-based NAS models running firmware version 3.2.0 or later.

You can create a LUN masking policy to configure permissions of iSCSI initiators which

attempt to access the LUN mapped to the iSCSI targets on the NAS. To use this feature, click

"Add a Policy" under "Advanced ACL".

Enter the policy name, the initiator IQN, and assign access rights for each LUN on the NAS.



Read-only: The connected initiator can only read the data from the LUN.



Read/Write: The connected initiator has read and write access right to the LUN.



Deny Access: The LUN is invisible to the connected initiator.

If no LUN masking policy is specified for a connected iSCSI initiator, the default policy

(Read/Write) will be applied. You can click "Edit" to edit the default policy.

Note:

Make sure you have created at least one LUN on the NAS before editing the default

LUN policy.

Hint: How do I find the initiator IQN?

Start the Microsoft iSCSI initiator and click "General". You will find the IQN of the initiator.