User manual

129
Click “Test” on the right to ensure the connection to the IP camera is successful.
If your IP camera supports audio recording, you may enable the option on the
“Recording Settings” page. Click “Apply” to save the changes.
Configure the settings of the IP camera 2 following the above steps.
After you have added the network cameras to the NAS, go to the “Live View” page.
The first time you connect to this page by the IE browser, you have to install the
ActiveX control in order to view the images of the IP camera 1 and IP camera 2.
You can start to use the monitoring and recording functions of the Surveillance
Station.