User's Manual

2. Product Overview
This chapter provides basic information about the QNAP device.
About the TS-hX86
The TS-hX86 series is a robust and reliable enterprise NAS powered by an Intel® Xeon® D processor, and
features two PCIe slots, two M.2 SSD slots, and four Intel 2.5 GbE ports. The TS-hX86 series can help your
business achieve reliable service-level agreement performances, including mission-critical file servers,
virtualization servers, collaborative video editing, or efficient data backup and recovery applications.
Hardware Specifications
Warning
If your QNAP product has hardware defects, return the product to QNAP or a QNAP-
authorized service center for maintenance or replacement. Any attempt to repair or
perform maintenance procedures on the product by you or an unauthorized third-party
invalidates the warranty.
QNAP is not responsible for any damage or data loss caused by unauthorized
modifications and installation of unsupported third-party applications.
For details, see the QNAP Warranty Terms and Conditions.
Tip
Model specifications are subject to change without prior notice. To see the latest
specifications, go to https://www.qnap.com.
Ordering P/N CPU Memory Power supply
TS-h686-D1602-8G Intel® Xeon® D-1602 8 GB Single
TS-h886-D1622-16G Intel® Xeon® D-1622 16 GB Single
Component TS-h686-D1602-8G TS-h886-D1622-16G
Processor
CPU Intel® Xeon® D-1602 Intel® Xeon® D-1622
Frequency Dual-core/4-thread 2.5 GHz/3.2 GHz
turbo
4-core/8-thread 2.6 GHz/3.2 GHz turbo
Architecture x86 64-bit
Encryption engine AES-NI
Memory
Pre-installed memory 8 GB RAM: 2 x 4 GB ECC DDR4
UDIMM
16 GB: 2 x 8 GB ECC DDR4 UDIMM
Memory slots 4 x Long-DIMM DDR4
Important
Use only QNAP memory modules to maintain system
performance and stability. For NAS devices with more than
one memory slot, use QNAP modules with identical
specifications.
Using unsupported modules may degrade performance,
cause errors, or prevent the operating system from starting.
Maximum memory 128 GB RAM: 4 x 32 GB
TS-hx86 User Guide
Product Overview 4