User manual

3.8.3 Hardware Settings
You can enable or disable the hardware functions of TS-201.
i. Enable configuration reset switch
By enabling this option, you can press the reset button for 5 seconds to reset
the administrator password and system settings to default.
ii. Enable hard disk standby mode
When this function is enabled, hard disk will go to standby mode if there is no
access within the specified period. Power LED will glow in blue and the Status
LED will be off in hard disk standby mode.
iii. Enable light signal alert when the free size of SATA disk is less than the value
The Status LED indicator will blink red and green when this function is enabled
and the free space of the SATA disk is less than the value. The range of the
value is 1-51200 MB.
iv. Auto power on when power resumes after power loss
When this function is enabled, TS-201 will turn on automatically when power
resumes after improper shutdown or power loss.
- 90 -