Owners manual

94
6. An SSD cache volume will be created.
Note: If SSD Cache is enabled with the Read-Write type, the SSD MUST NOT be
removed while it is being used, as this will cause data loss.
Rem oving SSD Volum es
Follow the steps below to remove a SSD volume:
1. Click "Remove".
2. Please note that all data on the selected hard drive(s) will be erased. Click "Yes" if
you are certain about this.
3. The SSD volume will be removed. This operation can take a prolonged period if the
SSD Cache is in Read/Write mode, as all the data in the cache must be flushed to
the hard drive first.
Expanding SSD Volum es
Follow the steps below to expand a SSD volume:
1. Click "Add SSD Drive".
2. Select the SSD drive(s) from the list and click "Expand".
3. Please note that all data on the selected hard drive(s) will be erased. Click "Yes" if
you are certain about this.
4. The SSD volume will be expanded.
Configuring Volum es for SSD Cache
Follow the steps below to configure volumes for a SSD cache:
1. Click "Cache Setting".
2. Select or deselect a volume to enable/disable the SSD cache, choose whether or
not to record large block, sequential I/O operations in the cache space, and click
"Finish".
3. The settings will be applied to the chosen volume.
Note: