Owners manual

99
Note: This feature is only applicable to files that have been changed between
snapshots. Otherwise, there will be no previous versions listed in "File Explorer" >
"Properties" > "Previous Versions".
Snapshot Vault
Snapshot Vault stores snapshots created and sent from remote NAS via Snapshot
Replica in Backup Station. It also lets you manage and restore remote snapshots.
Note:
If this is the first time using this feature, please configure Snapshot Replica in
Backup Station on the source NAS first.
Snapshots and related features are currently only available for the following NAS
series: x51*, x53, x63, x70, x71, x79, x80, x82, x89.
o
* The NAS must have minimum of 4 GB RAM to use snapshots.
o
* x51 series models only support up to 256 snapshots instead of 1024. The
HS-251 does not support snapshots.
Filtering Snapshots
Navigate to Snapshot Vault in "Storage Manager" > "Snapshot" > "Snapshot Vault" and
you will see a list of available snapshots. You can click the filter drop down list to filter
snapshots with a set of criteria:
Source: Source NAS IP address
Volume/LUN: The volume/LUN that has been replicated
Location: The storage pool where the snapshot has been stored
Status: The snapshot status
Note: If the status of a snapshot is not "Ready", you will not be able to view or
access that snapshot.
Displaying Snapshot Content
Navigate to Snapshot Vault in "Storage Manager" > "STORAGE" > "Snapshot", choose the
desired snapshot replication from the list, and click "Show Snapshots" to display its
content. You can see an overview of snapshots in the left panel or browse through
folders and see files in the snapshots on the right panel.
259