User manual

126
6.3 Network Settings
You can configure the WAN and LAN settings, DDNS service, file service, host access
control, protocol management and view the network settings in this section.
6.3.1 TCP/IP Configuration
Select one of the follo
wing options to configure the TCP/IP settings of the NVR.
 Obtain IP address settings automatically via DHCP
Select this option to allow the NVR to acquire an IP address on the local
network automatically if a DHCP server is available.
 Use static IP address
To assign a fixed IP to the NVR, enter the IP address, the subnet mask, and the
default gateway.
Primary DNS Server: Enter the IP address of the primary DNS server that provides
the DNS service for the NVR on the external network.
Secondary DNS Server: Enter the IP address of the secondary DNS server that
provides the DNS service for the NVR on the external network.
Note: The Jumbo Frame setting is valid in Gigabit network environment only. All
the network appliances connected must enable Jumbo Frame and use the same MTU
value.