User manual

165
Event schedule settings:
When you edit an event (not including camera disconnection, NVR events, and
external events), you can click ‘Set Schedule’ to define when the alarm settings will
be active.
To create a new schedule, select ‘New’ and enter the schedule name. The schedule
supports maximum 25 characters (double-byte characters, spaces, and symbols are
allowed). Select the day and time when the alarm settings should be active. Click
+ to add a schedule; or – to delete a schedule. Up to 6 settings can be defined for
each schedule.
The settings will be shown on the graphical table. Click ‘Apply’ to save the settings.
To use the same schedule for all the events, click ‘Apply to All Events’. You can also
select to use the default schedule or a formerly created schedule from the list. The
default alarm settings are active all day, every day.