User manual

37
Chapter 3. Use VioStor by Local Display
Note: This feature is supported by VioStor Pro Series NVR only. The models
include VS-8040U-RP Pro, VS-8032U-RP Pro, VS-8024U-RP Pro, VS-8040 Pro,
VS-8032 Pro, VS-8024 Pro, VS-6020 Pro, VS-6016 Pro, VS-6012 Pro, VS-4016U-RP
Pro, VS-4012U-RP Pro, VS-4008U-RP Pro, VS-4016 Pro, VS-4012 Pro, VS-4008 Pro,
VS-2012 Pro, VS-2008 Pro, VS-2004 Pro.
You can connect to VioStor by local display via the VGA connector to perform PC-less
quick configuration, monitoring, and video playback. To use this feature, you need
to do the following:
1. Make sure at least one hard disk drive has been installed on VioStor.
2. Connect VioStor to the network.
3. Make sure the IP cameras have been configured and connected to the network.
4. Connect a VGA monitor or TV (suggested video output resolution: 1920 x
1080)* to VioStor via the VGA connector.
5. Connect a USB mouse and a USB keyboard (optional) to VioStor via the USB
ports.
6. Turn on VioStor.
*The local display feature supports maximum screen resolution of 2048*1536
(QXGA).