Installation Instructions

ManualsBrandsQNIGLO ManualsElectronicsWalkie Talkie

Button function description

Name

Description

POW

Long press for 3 second

to turn on or turn off

Short press to enter menu

setting,long press to lock key

PTT

Press and hold this button

to send a voice intercom

CALL/SCAN

Short press ,the other party

can receive the call,and the local walkie

talkie will also send a CALL tone

Long press to enter SCAN mode

Press this button in standby mode to

adjust the volume output when entering

the menu function,this button used to

select the setting function

Press this button in standby mode to

adjust the volume output when entering

the menu function,this button used to

select the setting function

Indicator pattern

Name

Content

Button:red orange

blue green light

Launch

indication

The red orange blue green

light will lights up when

launching.

When you release the PTT

button,the lights will turn off.

Channel

indication

On this location,press the

MENU key,then press the

UP or DOWN key to choose

the channel.

Battery

indication

More battery lattices

means more electricity

Code

indication

There are 99 CTCSS/

DCS code

CODE

Scan

indication

When SCAN function is

available,it will show in

the display,It will not show

when close this function.

SCAN

VOX

indication

When VOX function is

available,it will show in

the display

VOX

Keyboard lock

indication

When Keyboard lock

function is available,it will

show in the display(PTT

button is Unrestricted)

Volume

level indication

More Volume lattices

means more loud

Radio FM radio 85--108MHz

+/-

3.SET CODE-Press the menu button twice to enter the code

setting, OFF is no code, 01 code is 67Hz, 39-99 is DCS code.

Freq.

Ch Ch

Freq.

Ch Ch

Freq. Freq.

67.0

71.9

74.4

77.0

79.7

82.5

85.4

88.5

91.5

94.8

97.4

100.0

103.5

107.2

110.9

114.8

118.8

123.0

127.3

131.8

136.5

141.3

146.2

151.4

156.7

162.2

167.9

173.8

179.9

186.2

192.8

203.5

210.7

218.1

225.7

233.6

241.8

250.3

Functional operation

1.This machine has a built-in polymer lithium battery.

Press and hold the power button to turn it on or off.

2.SET CHANNEL-Press the MENU key to enter the

channel setting, the backlight lights up 6S, the channel

display pattern starts to flash, use the plus or minus button

to select the channel.Press the PTT button to confirm and exit.

USA frequency FRS CH01-CH22

462.5625

462.5875

462.6125

462.6375

462.6625

462.6875

462.7125

467.5625

467.5875

467.6125

467.6375

467.6625

467.6875

467.7125

462.5500

462.5750

467.6000

467.6250

462.6500

462.6750

462.7000

462.7250

Ch.

Freq(MHz)

Ch.

Freq(MHz)

Precautions

LED Indication

CODE

SCAN VOX FM MON

2.The code is the secondary encryption function.Two

walkie must be the same channel and code or both of the

code showing“OFF”,otherwise they can’t communicate

with each other.

Warming Tips

Please read the instructions carefully before use.

1. In FM mode, if someone calls, it will automatically switch to

intercom mode , the intercom mode will automatically switch to

FM mode if you not use the intercom function after 3 seconds.

When on standby,press the FM button once to enter FM mode,

press again to exit the FM mode. In FM mode,Long press MENU

button to go up to the automatic search, long press the CALL

button to automatically search down.Short press MENU button

to go up to the manually search,short press the CALL button to

manually search down.Press button to turn up the volume,

press button to turn down the volume.

Instructions

Q136

4.VOX- Press the menu three times to enter the voice-activated

function selection. There are OFF, 1, 2, and 3 third-range

sensitivity options.

5.CALL TONE-Press the menu four times to enter the CALL

tone selection function, with 01 to 10 sounds available.

6.BUTTON SOUND-Press the menu five times to enter the

button sound switch selection function. When the ON button

is selected, the speaker will emit a tone, and when the OFF

button is selected, there will be no tone.

7.Press the menu button six times to enter the end of the

emission prompt tone selection function. Select ON to release

the PTT and there will be a prompt tone. On the contrary, if

choose OFF, there will be no prompt tone.

8.EXIT-Press the menu button seven times to exit the menu

settings, you can also press PTT to confirm the exit menu.

9.External headphones- Plug the headphones into the socket

and use an external headset

Charging function

When the power is insufficient, please charge it in time,

use the adapter 5V/1A, insert the battery charging port,

usually it can be fully charged in about 4 hours. ( red light

means Charging;green light means full of )

Warning:

1. Please don't put the walkie talkies in the water.

2. Please don't let kids charge alone

3. Please do not approach the fire source

4. Please do not use at the gas station

5. Transformers/ battery chargers used with the toy are to be

regularly examined for damage to the cord, plug, enclosure

and other parts, and in the event of such damage, they must

not be used until the damage has been repaired.

6. “Misuse of transformer can cause electrical shock.”

7. 1) “The toy shall only be used with a transformer for toys”;

2) “The transformer is not a toy”.

3)Toy to be disconnected from the transformer before cleaning.

FCC Statement

For a Class B digital device or peripheral, the instructions

furnished to the user shall include the following or similar

statement, placed in a prominent location in the text of the

manual:

NOTE: This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician

for help.

– This radio is designed for and classified as “General population/

uncontrolled Use”

– DO NOT operate the radio without a proper antenna attached,

as this may damage the radio and may also cause you to exceed

RF exposure limits. A proper antenna is the antenna supplied

with this radio by the manufacturer or an antenna specifically

authorized by the manufacturer for use with this radio.

– DO NOT transmit for more than 75% of total radio use time,

more than 75% of the time can cause RF exposure compliance

requirements to be exceeded.

– This transmitter may operate with the antenna(s) documented

in this filing in Push-to-Talk and body-worn configurations.

RF exposure compliance is limited to the specific belt-clip and

accessory configurations as documented in this filing and the

separation distance between user and the device or its antenna

shall be at least 2.5 cm.

This device complies with FCC Rules. Operation is subject to the

following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including

interference that may cause undesired operation.

Q136 FCC

Q-136

PCB-92-V1

Name of EUT:

Trade mark:

Model:

Power supply:

RF Exposure Environment

Hardware Version: Software

Version:

Operation Band

Modulation Type:

Emission Designator:

Channel Separation:

Antenna Type:

Max Ambient Temperature

Walkie Talkie

QNIGLO

General Population/ Uncontrolled

V01

12.5 kHz

20% ~ 75%

Overall (Length x Width x Thickness):

72 x 55 x 23 mm

Antenna(Length): 23 mm

15 ~ 35

600mAh Rechargeable Lithium

Battery, DC 3.7V/0.5A

462.5625MHz~ 462.7125MHz

467.5625MHz~ 467.7125MHz

462.5500MHz~ 462.7250MHz

FM(Analog)

11K0F3E

Integral

Humidity

Dimension

Q136 CE

25.36 dBmEffective Radiated Power

Q-136

PCB-92-V1

Name of EUT:

Trade mark:

Model(s):

Power supply:

RF Exposure Environment

Hardware Version:

Software Version:

Operation Band

Modulation Type:

Emission Designator:

Channel Separation:

Antenna Type:

Max Ambient Temperature

Walkie Talkie

QNIGLO

General Population/ Uncontrolled

V01

12.5 kHz

20% ~ 75%

Overall (Length x Width x Thickness):

72 x 55 x 23 mm

Antenna(Length): 23 mm

15 ~ 35

600mAh Rechargeable Lithium

Battery, DC 3.7V/0.5A

FM(Analog)

11K0F3E

Integral

Humidity

Dimension

Restriction information

This product can be used across EU member states.

446.00625-446.09375MHz