Installation Instructions

Warming Tips
Please read the instructions carefully before use.
LED Indication
Channel/
Menu item
Battery Level
TX/RX/lcon
Indicator
pattern
Name
Content
88
Code
indication
88
CODE
Scan
indication
SCAN
VOX
Transmitting:
Receiving:
Press the "MENU" key, then press
the "UP" or "DOWN" key to choose
the channel.
When the battery is empty, the radio
chirps periodically after releasing
"PTT" button. The radio powers off
when the voltage drops below a
predetermined level.
Voice
Action(VOX)
Keyboard Lock
Indication
Volume
Level Indication
Press "Menu" to set the Channel,
when the "CODE number "is
flashing, press the button of "+"，
"-" to opt the channel, and then
press "PTT" to confirm.
There are 99 CTCSS/DCS codes.
Press /Mon to SCAN
When SCAN function is available,
it will show in the display, it will
not show when close this function.
Voice Activation(VOX) allows
you to talk hands-free.
When VOX function is available,
it will show in the display.
When Keyboard lock function is
available, it will show in the display
(PTT button is Unrestricted)
he speaker volume level is indicated
by the numbers 1-8 displayed.
Press "+" to increase the volume.
Press "-" to decrease the volume.
Warning
1. Please don't put the walkie talkies in the water.
2. Please don't let kids charge alone
3. Please do not approach the fire source
4. Please do not use at the gas station
5. Transformers/ battery chargers used with the toy are to be
regularly examined for damage to the cord, plug, enclosure
and other parts, and in the event of such damage, they must
not be used until the damage has been repaired.
6. “Misuse of transformer can cause electrical shock.”
7. 1) “The toy shall only be used with a transformer for toys”;
2) “The transformer is not a toy”.
3)Toy to be disconnected from the transformer before cleaning.
:Fully Charged
:Low Battery
CODE
Antenna
Earphone Jack
Channel/Menu item
Battery Level
CTCSS/Menu option
Volume
Keypad Lock
Scan/Monitor
UP
MIC
Power/Menu
TX/RX/lcon
PTT
Scanning
VOX
Call/Lock
Down
Speaker
EN
Belt attachment clip
LED Indicators
Red Light Charging
Green Light Fully Charged
Battery
Release
...
...
Lock
Buckle
CHOKING HAZARD-small parts,
Not for children under 3 years.
WARNING:
!
The packaging has to be
kept since it contains
important information.
Key Description
Button
Description
Short press to enter the menu setting
Long press to lock the key.
Press "PTT" to exit the menu.
Talking : Press "PTT" to chat.
Press "PTT" to confirm and save the seting.
Press "PTT" to exit Menu setting.
Short Press for Transmit Call Tone.
Long Press for Lock or unlock the keypad.
/
In the standby situation,
Short press the key to enter "Scanning",
Long Press to turn on the "Monitoring
function".
/
Press the "－" to adjust the volume in the
standby situation.
This key also can be used to select menu
when entering to the "Setting Menu”
Press the “+" to adjust the volume in the
standby situation.
This key also can be used to select menu
when entering to the "Setting Menu"
+
_
PTT
Instructions
1. This machine has a built-in polymer lithium battery.
Press and hold the power button to turn it on or off.
2. Press the "Menu" to set the channel. When the backlight lights
up 6 seconds, the "Channel" icon starts to flash on the monitor,
press the "＋" and "－" to select channel and press "PTT" to
confirm and exit the setting.
Freq.
Ch Ch
Freq.
Ch Ch
Freq. Freq.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
67.0
71.9
74.4
77.0
79.7
82.5
85.4
88.5
91.5
94.8
97.4
100.0
103.5
107.2
110.9
114.8
118.8
123.0
127.3
131.8
136.5
141.3
146.2
151.4
156.7
162.2
167.9
173.8
179.9
186.2
192.8
203.5
210.7
218.1
225.7
233.6
241.8
250.3
4. Press the "Menu" for 3 times to enter the "Voice-Activated/VOX"
selection. There are 3 sensitivities for options, "OFF", "1", "2" and "3".
Press "PTT" to confirm and exit.
5. Press the "Menu" for 4 times to set the "Call Tone". There are 10 kinds
of ringtones to choose from. Press "PTT" to confirm and exit.
6. Press the "Menu" for 5 times to enter the "Key Tone Switch" selection.
When selecting the "ON" button, it will beep a tone, and if you select the
OFF button, there is no tone. Press "PTT" to confirm and exit.
7. Press the "Menu" for 6 times to enter the "Setting Transmit Ending
Sound" selection. When selecting the "ON" button, it will beep a tone,
and if you select the OFF button, there is no tone. Press "PTT" to confirm
and exit.
8. Press the "Menu" 7 times to exit menu setting. You can also press "PTT"
to confirm it and exit the setting menu. Press "PTT" to confirm and exit.
9. Headphones: Plug the headphones into the jack to use it.
Precautions
The code is the secondary encryption function. Two walkies must be
the same channel and code or both of the code showing“OFF”, otherwise
they can’t communicate with each other.
Note:
When the power is insufficient, please charge it in time.
Please use the 5V/1A adapter, insert the battery charging port,
Generally, it can be fully charged in about 4 hours.
Red Light means Charging;
Green light means fully charged.
Q&A
Q1: One of the walkie talkie can’t work?
A1:The walkie talkie has the secondary encryption function, so please
make sure the code number of the walkie talkies are the same or both
of the code are displaying "OFF", otherwise, they can't communicate
with each other.
Notice:
The code must be in the same condition.
Q2: Why the communication range is different from the description?
A2:The walkie talkie's communication range is tested under the
barrier-free space, but in the real use scenarios, it will be affected by
different factors, such as the building barrier.
If you have any question, please contact us with
[e-mail].
FCC Statement
For a Class B digital device or peripheral, the instructions furnished to
the user shall include the following or similar statement, placed in a
prominent location in the text of the manual:
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
– This radio is designed for and classified as “General population/
uncontrolled Use”
– DO NOT operate the radio without a proper antenna attached, as this
may damage the radio and may also cause you to exceed RF exposure
limits. A proper antenna is the antenna supplied with this radio by
the manufacturer or an antenna specifically authorized by the
manufacturer for use with this radio.
– DO NOT transmit for more than 75% of total radio use time, more
than 75% of the time can cause RF exposure compliance requirements to be
exceeded.
– This transmitter may operate with the antenna(s) documented in this
filing in Push-to-Talk and body-worn configurations. RF exposure
compliance is limited to the specific belt-clip and accessory
configurations as documented in this filing and the separation distance
between user and the device or its antenna shall be at least 2.5 cm.
This device complies with FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Q168 Plus CE
15 ~ 35
O
C
O
C
Name of EUT:
Trade mark:
Model/Type reference:
Listed model(s):
Power supply:
RF Exposure Environment
Hardware Version:
Software Version:
Operation Band
Effective Radiated Power
Modulation Type:
Emission Designator:
Channel Separation:
Antenna Type:
Max Ambient Temperature
Humidity
Dimension
Walkie Talkie
QNIGLO
Q-168 Plus
Q-168
General Population/ Uncontrolled
PCB-82-V5
V01
446.00625-446.09375MHz
26.11 dBm
FM(Analog)
11K0F3E
12.5kHz
Integral
20% ~ 75%
Overall (Length x Width x Thickness):
102 x 57 x 27 mm
Antenna(Length): 49 mm
15 ~ 35
O
C
O
C
Name of EUT:
Trade mark:
Model/Type reference:
Listed model(s):
Power supply:
RF Exposure Environment
Hardware Version:
Software Version:
Operation Band
Modulation Type:
Emission Designator:
Channel Separation:
Antenna Type:
Max Ambient Temperature
Humidity
Dimension
Walkie Talkie
QNIGLO
Q-168
Q-168 Plus
General Population/ Uncontrolled
PCB-82-V5
V01
462.5625MHz~ 462.7125MHz
467.5625MHz~ 467.7125MHz
462.5500MHz~ 462.7250MHz
FM(Analog)
11K0F3E
12.5kHz
Integral
20% ~ 75%
Overall (Length x Width x Thickness):
102 x 57 x 27 mm
Antenna(Length): 49 mm
Q168 Plus FCC
Instructions
1. This machine has a built-in polymer lithium battery.
Press and hold the power button to turn it on or off.
2. Press the "Menu" to set the channel. When the backlight lights
up 6 seconds, the "Channel" icon starts to flash on the monitor,
press the "＋" and "－" to select channel and press "PTT" to
confirm and exit the setting.
3. Press the "Menu" twice to enter the "Code Setting". OFF means
no code, 01 code is 67Hz, the 39-99 code is DCS code. Press "PTT"
to confirm and exit.
1
2
3
4
5
6
7
8
9
10
11
462.5625
462.5875
462.6125
462.6375
462.6625
462.6875
462.7125
467.5625
467.5875
467.6125
467.6375
12
13
14
15
16
17
18
19
20
21
22
467.6625
467.6875
467.7125
462.5500
462.5750
467.6000
467.6250
462.6500
462.6750
462.7000
462.7250
Ch.
Freq(MHz)
Ch.
Freq(MHz)
USA frequency FRS CH01-CH22
Restriction information
This product can be used across EU member states.
Effective Radiated Power:26.11 dBm
DC 3.7V for 1100mAh Li-Battery
DC 6V for 4*AAA Size Battery
DC 6V for 4*AAA Size Battery
DC 3.7V for 1100mAh Li-Battery