User`s manual

Multi-WAN VPN QoS Router
78
Add to IP List
After setting name and IP address, push this button to add the information
into the IP list below. If this IP (or range) is already in the list, you can not
add it again.
Local Group Set
You can choose from the IP list on the left side to set up a local IP group.
IP Group
Choose IP Group that you would like to modify. If you would like to add
new groups, please push ―Add new group‖ button.
Group Name
When you add new groups, please note if the group name is in the column.
Delete Group
Choose the group that you would like to delete from the pull- down list,
and push the ―Delete Group‖ button. System will ask you again if you
would like to delete the group. After pushing the confirmation button, the
group will be deleted.
button
You can choose several IPs from IP list on the left side, and push this
button to have them added into the group the right side.
Delete
Delete self- defined IP or IP range.
Apply
Click “Apply” to save the network configuration modification
Cancel
Click “Cancel" to leave without making any changes.
Remote IP Group Management:
Basically, Remote IP Group setups are exactly the same as Local IP Group setups. However,
remote IP group does not have automatically learning functions. Instead, you need to define
addresses, ranges and groups manually. For example, 220.130.188.1 to 200 (range).