User`s manual

SmartRG™ Residential Gateways
Page | 10 Confidential SmartRG © 2012
Front Panel LEDs
The SmartRG’s front panel LEDs can be useful for troubleshooting and diagnostic purposes. The
typical SmartRG front panel is shown below.
Figure 1 SmartRG Front Panel LEDs
The SmartRG front panel LEDs are defined as follows:
Power
ON: Power is on. OFF: Power is off.
WAN (SR500N/NE)
ON: Ethernet WAN Active. OFF: No link.
DSL
ON: Link established and active. OFF: No link. Blinking: Training mode.
Internet
ON: Internet connection established OFF: No Internet connection Blinking:
Data transfer on WAN Internet connection
LAN 1-4
ON: LAN link established and active OFF: No LAN link. BLINKING: Data
transfer on LAN port.
WLAN
ON: WLAN enabled. OFF: WLAN disabled. Blinking: data transfer currently
occurring over the WiFi interface.