Installation manual

TROUBLESHOOTING
MOVING THE PANEL
QOLSYS CONFIDENTIAL AND PROPRIETARY
PAGE OF 58 64
© 11/4/13 All rights reserved
If, for ANY reason, you need to move the panel, be sure you have enough battery life to
keep the panel running while not connected to A/C power. If you do not, you must shut
down the panel’s operating system before disconnecting the power supply.
!
1.Select “Settings” from the home screen
2.Enter the installer code.
3.Select “Shut down”
4.Wait for panel LEDs to turn off
5.Disconnect the power
FIND IT
Settings
?
QUESTIONS? Contact us at [e-mail]
SUPPORT
Power
Down
IMPORTANT: Failure to perform these
steps in the proper sequence may result in
data corruption and/or panel failure.