Installation Instructions

Qolsys SRF Card

General Applications:

The Qolsys SRF 319.5MHz Module features the Si4463 which is a low power transceiver capable of

providing an air interface to, and compatibility with devices. OEMs that integrate this module will gain

compatibility with a variety of interlogix devices as well as Qolsys S-line devices for security:

door/window sensors, motion detectors, glass sensors etc.

Installation and Operation:

It is recommended to secure the module to a large ground plane using the mounting hole and header

pins. Do not place any large pieces of metal around or near the antenna, as it will inhibit performance.

PAGE 1
Qolsys SRF Card General Applications: The Qolsys SRF 319.5MHz Module features the Si4463 which is a low power transceiver capable of providing an air interface to, and compatibility with devices. OEMs that integrate this module will gain compatibility with a variety of interlogix devices as well as Qolsys S-line devices for security: door/window sensors, motion detectors, glass sensors etc.
PAGE 2
The Qolsys SRF card operates at the 319.5 MHz. Data and protocol specifications are beyond the scope of this document. Please contact Qolsys for the technical specifications. FCC Compliance: FCCID: 2AAJXQS-SRF319 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.