User's Manual

IQ MOTION- INSTALLATION MANUAL
QOLSYS CONFIDENTIAL AND PROPRIETARY PAGE 2 OF 6
© Last revised 2/27/15 All rights reserved
•IQMotionSensor is designed for
indoor use and is compatible with
homes where pets up to 40 lbs (18
kg) are present. To minimize the
possibility of false alarms the
following guidelines should be
followed:
•
The sensor may be mounted in a
corner or on a flat wall that is free
of vibrations.
•If possible, mount the sensor
within 100 ft (30.5 m) of the
panel. While the transmitter may
have a range of 600 ft (200 m) or
more out in the open, the
environment at the installation site
can have a significant effect on
transmitter range. Verify actual
transmitter range for each
installation.
•
Position the sensor to protect an
area where an intruder is most
likely to walk across the detection
pattern.
•
Mount the sensor permanently
on a flat wall or in a corner.
•
Mount the sensor on an interior
wall facing in.
•
Position the sensor so it faces a
solid reference point, such as a
wall.
•
Close all windows in an area with
an armed motion sensor.
DO NOT:
•
Aim the sensor at windows,
fireplaces, air conditioners, area
heaters, or forced air heating vents.
•
Place the sensor in direct sunlight
as sudden changes in temperature
may trigger a false alarm.
•
Mount the sensor near duct work
or other large metallic surfaces
that may affect the RF signals.
•
Set the sensor on a shelf.
GUIDELINES
Flush-mount or corner-mount the sensor depending on the selected location and
desired coverage area
MOUNTING OPTIONS
BATTERY ACTIVATION
To activate the batteries in the sensor, remove the cover and pull out the plastic tab
between the batteries and the contacts.
CORNER
STRAIGHT
MOUNT
CORNER
ANGLE
DOWN
MOUNT
FLUSH
WALL
MOUNT
For pet immunity from a corner
For pet immunity
No pet immunity