User's Manual

Page
31 of 109
QOMO HiteVision, LLC. QClick FCC ID: XQGQRF600-RE
QOMO HiteVision,LLC.
3) “Ti:”Test Title. It is used for easily locating a test later. The ARS system
does not use this info, hence it can be assigned by a user to any easily
remembered text title. However the “Choice Keys” letters are limited to a
range from “A” to “J”, the title name entered has its limits. But in the
electronic format, there is no limit.
All of above fields must be filled to complete the setting. When the setting
is done, press the “T/Y Key”, the exam screen will show. Press the
“Return Key”, to go back to the previous menu if needed.
8- Student keypad special functions:
(1) Hardware Test
The PC software must be in hardware test mode in order to do the hardware test.
This function can be used to test the student keypad.
To enter to the Hardware test screen:
Under the main menu, select item “4.Hardware” to enter to the Hardware
submenu. Select “2.HardwareTest” submenu to enter to the test screen.
Enter the channel number, which is the same as the host machine’s channel
number selected by the PC software, and then press the “T/Y Key” or the “Enter
Key”. If the channel number matches the host machine’s channel number, the
PC software will display the student keypad’s student ID on a row in a first come
first serve order. Additionally, the register number is also shown on this test
screen in the keypad. Otherwise, the failure error message will show on the top
of this test screen in the keypad.
(2) Student keypad factory settings:
WARNING: Using this function will clear all user data stored, including all the test
answers in this keypad. It is NOT recoverable.
Sometimes it is convenient to clear all data stored in this keypad without