User's Manual

Page
39 of 109
QOMO HiteVision, LLC. QClick FCC ID: XQGQRF600-RE
QOMO HiteVision,LLC.
<3> Under “OptSum:” Set the totle number of option and under ”StdAns:”
set the standard answer. Use the Up Key or Down Key, and Left Key or
Right Key to select the desired character or number and then press the Ok
Key to input the character or number selected. After setting up, press the
Enter Key to send. The test will start automatically through the successful
sending.
6- Instructor keypad sleep mode:
For saving the battery, a sleep mode is implemented.
After 5 minutes without any operation in the keypad, the keypad will enter to the
sleep mode and will shut off the instructor screen display. The user can press any
key to wake up the keypad to return to the previous display.
After 10 minutes without any operation in the keypad, the keypad will power off. The
user can not wake up keypad by simply pressing any key at this point. The user
then needs to power on the keypad to start it over.
3. Main Receiver and USB Cable
The main receiver is used to send and receive signals to and from the remote keypads and to
exchange data with the host computer. The main receiver can be directly plugged into a computer
USB port or connected to a computer through USB cable.
Specifications
Dimensions (l w h): 76 mm x 23 mm x 10 mm
Weight: 26g
Operating Temperature: 0-40 degree
Operating Relative Humidity: 0-90%
Transmitting and receiving distance: ~200 feet radial
Function: Used to send or receive signals to and from the
remotes and exchange data with the computer.
Frequency band : 2404.1-2480.0 MHz ISM/SRD band
systems