User's Manual

Page
56 of 109
QOMO HiteVision, LLC. QClick FCC ID: XQGQRF600-RE
QOMO HiteVision,LLC.
Roll Call:
The Roll Call mode is used for helping the instructor to roll call the attendances. When you select
the Roll Call activity mode, the system won’t ask you to load in any quiz files or any answer sheets
prior to starting the Roll Call activity. The roll call result can be saved to the system database for
the later reporting use, or can be instantly viewed after the activity.
Free Style Normal/Rush/Elimination:
The QClick system uses the Free Style control for the Normal Quiz, Rush Quiz and Elimination
activity mode. The Free Style control is used for the instructor to start a quiz session without loading
a prepared quiz file or an answer sheet. The quiz question information could be the captured
images from the computer or from the internet or could be from a third party white board or from the
system built in white board drawing or even from the instructor’s dictation. The correct answers for
the questions could be provided after finishing each question answering or provided after the whole
quiz session is completed. The main advantage of Free Style over the No Free Style is to give the
instructor more freedom to use the QClick system, which is not to restricted to the well preparing
material examination before the instructor to start a quiz session, and at the same time, it does not
lose any student quiz performance data.
To use the Free Style control, follow these steps:
1. Under Quiz Genius tab window, check the Free Style check box to select the Free Style
control.
2. Select the Normal Quiz or Rush Quiz or Elimination activity mode from the Activity Mode
drop-down list.
3. Click Run button to start the Free Style activity mode.
4. The status tool bar displays on the bottom of screen. If you don’t want to capture any
images or to use the system white board tool to draw or to write a quiz question, you may
click the Start button on the status tool bar to start an oral quiz.
5. To capture an image, right click on the status tool bar area. Select the Cut Picture item
from the pop-up window. The cursor changes the shape and the color. Hold the left mouse
button and draw a selection rectangular window on the objective image you want to capture.
Then double click
on the selection rectangular box. The system white board tool displays the
image you capture on the center of the white board screen.
6. If you want just to use the system white board to draw or write a quiz question, right click on
the status tool bar area. Select the Manage Picture item from the pop-up window. The
system white board tool displays.