User's Manual

Page
105 of 109
QOMO HiteVision, LLC. QClick FCC ID: XQGQRF600-RE
QOMO HiteVision,LLC.
be muted for that activity.
To set up the audio sounds and the instructor remote mouse control sensitivity, follow these steps:
1. Select Settings Tab window.
2. Click the System icon; this will bring up the System Settings window.
3. Click on one of sound activity check boxes that you are going to work on; the Browse…
button will become active. Click the Browse… button; this will bring up the sound file open
browser. Select your favorite sound file for the activity and then click Save button to save it to
the system.
4. Repeat step 3, if you desire to set up more sounds to other activities.
Note: If the check box is unchecked, the sound will be muted for that activity.
5. To set up the remote mouse sensitivity, move the cursor onto the indicator on the Mouse
Sensitivity Setting level bar, and then click and hold the left mouse button to drag the level
indicator to left or right for decreasing or increasing the remote mouse sensitivity.
6. Click the Save button to save the system setting. Then click the Close button to close the
setting.
Channel:
The Channel setup is used to read the channel number of the main receiver connected to the
system and also used to set a new channel number for the main receiver. The channel number has
been preset when a main receiver is delivered from the factory. Under rare circumstances, the
channel number needs to be set to a different number to avoid interference of other main receiver
nearby. For QRF600 system, the change of main receiver channel number will not affect the
instructor and student keypad communication, because the keypad can automatically allocate a
main receiver.
To set up the main receiver channel, follow these steps:
1. Select Settings Tab window.
2. Click the Channel
icon; this will bring up the Set Channel window.
3. If a main receiver is plugged into a USB port, the channel number of the receiver will be
displayed on the Set Channel text box. Click on the text box to enter the channel number
you desire for the main receiver. Then click on the Send button to send the
change to the main receiver. The valid channel number is from 0 to 49.