User's Manual

www.qomo.com

105

menu to enter into the Settings submenu.

2. Under the Setting submenu, select “4.DefaultSet” submenu in order to restore the factory

settings.

3. Press the “Menu/OK” key

to confirm the operation.

4. Follow the screen prompt, and press the“Del Key”

to initialize the setting.

3.1.2.2.9 Student keypad sleep mode

In order to increase the battery life of the response pads, a sleep mode has been implemented in the

student keypad.

To use the sleep mode settings for the student keypad, follow these steps:

1. Under the main menu, Press Down Key

or Right Key to select SETTINGS

menu to enter into the Settings submenu.

2. Under the Hardware submenu, select “2.ScreenSaver” submenu in order to set the

duration time before going to the keypad sleep mode.

3. Press the “Up Key”

, Right Key or “Down Key” , Left Key to

increase or decrease the time setting.

4. Press the Menu/ok Key

to confirm the setting.

Note: If the clicker stays without any interaction for a period of time that set in Screen Saver, the

clicker will enter into a sleep mode which will shut down the screen’s display. The user can press

any key to wake up the keypad and return to the previous display. For further saving the battery life,

you should turn off the power of the clicker.

3.1.2.2.10 Routine steps using the student keypad

• Taking a quiz with the pace controlled by the instructor

Student Keypad Operation Form

Form

Class Status Is the Student

ID in the

class list?

Actions

Result