User's Manual

www.qomo.com

120

Note: No main receiver or a PC is needed for conducting a session in this mode.

1. Select the Offsite mode in the instructor keypad.

2. Select the function Begin Session. If the keypad has reached maximum storage, you must

purge some of the existing data. Refer to session 3.2.2.5.6 Session List for detailed

instructions.

Note: Before purging data, make sure you have uploaded the session into the QClick database

system. Otherwise, the session data will not be recovered after the purging.

The LCD screen will display a list of classes previously loaded.

3. Move the highlight using Up

/Down Key to the class area and then select the

desired class by pressing the Menu/OK Key

. If there are no classes loaded in the

keypad, the screen will display “NoClasslist!”.

Once you have successfully selected a class, choose an activity mode from the list displayed on the

LCD screen.

4. Move the highlight using Up

/Down Key to the ExamList area and then select

the desired exam by pressing the Menu/OK Key

. If there is no exam loaded in the

keypad, the ExamList area is blank. If you choose one of the Free Style activities, which

include FreeNormal, FreeRush and FreeEliminate, you will not need to load an exam prior

to conducting the quiz. However, if you choose one of the No Free Style activities, then you

must load an exam. If no exams are downloaded into the instructor’s keypad, then after

beginning a session, the LCD screen will display this message “NoExamList”