User's Manual

www.qomo.com

2. Press Down Key

or Right Key to select SET STUDENT ID menu.

3. Under the “SetStudentID” screen, enter a valid Student ID and then press the “Menu

Key/OK”

to save it. The Student ID can be the combination of numeric and alpha.

To set a username, follow these steps:

1. Under the NoHost screen, press the “Menu/OK” key

to enter into the main menu.

2. Select “5.SetUserName” submenu or directly press number “5”.

3. Under the “SetUserName” screen, enter a valid user name and press the “Menu/OK” key

to save.

(2) Login to a class:

To login to a class, follow these steps:

Under the NoHost screen, select the “Login” right soft key

to directly login to your class.

1. Under the NoHost screen, press the “Menu/OK” key

or “menu” “Left Soft Key”

to enter the main menu.

2. Select “Login” to login into your class.

Note: The clicker will detect the active class in the closest proximity.

(3) Set Channel:

If the clicker does not automatically detect the right class you would like to attend, you may manually

set your clicker communication channel to the channel number that the class use. The class channel

number is the main receiver channel number set.

Note: The main receiver channel can be set in the software. Refer to the software channel session.

To set the clicker channel, follow these steps:

1. Under the NoHost screen, press the “Menu/OK” key

to enter into the main menu.