User's Manual

Copyright © 2009 All Rights Reserved by QOMO HiteVision.
www.qomo.com
119
• Select Settings Tab.
• Click the System
icon; this will display the System Settings window.
• Click on the sound activity check boxes you desire and the Browse button will be displayed.
Click the Browse button; this will display the sound file browser. Select the desired sound file
for the activity and then click the Save button to save it into the system.
• Repeat step 3, if you desire to set up additional sounds for other activities.
Note: If the check box is unchecked, the sound will be muted for that activity.
To set up the remote mouse sensitivity, move the cursor onto the indicator on the Mouse
Sensitivity Setting level bar, and then click and hold the left mouse button to drag the level
indicator to the left or right for decreasing or increasing the remote mouse sensitivity.
Click the Save button to save the system setting. Then click the Close button to close the setting.
3.5.2 Channel:
The Channel setup will read the channel number of the main receiver connected to the system and
will also be used to set a new channel number for the main receiver. The channel number is preset
when a main delivered. Using the QRF900 system, any changes to the main receiver channel
number will not affect the instructor and student keypad communication because the keypad will
automatically search for the main receiver channel.
To set up the main receiver channel, follow these steps:
1. Select the Settings Tab.
2. Click the Channel
icon; this will display the Set Channel window.