User's Manual

www.qomo.com

120

3. If a main receiver is plugged into a USB port, the channel number of the receiver will be

displayed on the Set Channel text box. Click on the text box to enter the channel number

you desire for the main receiver. Then click on the Send

button to send the

change to the main receiver. The valid channel number is 0 to 49.

3.5.3 Hardware Test:

The Hardware test is used to check the communication of the main receiver, instructor remote

control, and the student keypad.

To use the hardware test tool, follow these steps:

1. Select Settings Tab.

2. Click the Hardware

icon; this will display the Hardware test window.

3. When the main receiver is plugged into a USB port, the channel number of the receiver

will be displayed on the Hardware Channel text box.

4. Using the instructor remote control or the student keypad, select the hardware test menu.

Refer to the instructor and student hardware manual for details regarding how to enter the

hardware test menu. Then select the same channel number as the one displayed on the

Hardware Channel text box.