User's Manual

Copyright © 2009 All Rights Reserved by QOMO HiteVision.
www.qomo.com
15
To create a new test answer frame, follow these steps:
1) “Exam Id:” This item will be used to match the Test taken when the homework is submitted
and the ID is also used for identification when searching for a test later. The ID will be
assigned if the Test is in electronic format which is delivered through the software when
you choose the Homework or Paper Mode. If a test is distributed in paper format, the Test
ID will be assigned by the instructor and the ID will be entered manually by the students
using their keypads.
2) “Question Number:” This refers to the number of questions. This item will allow us to
determine how many questions are in a test. The number of questions will be assigned if
the Test is in electronic format, delivered through the Software when you choose the
Homework or Paper Mode. If the Test is distributed in paper format, the number of
questions will need to be filled in by the students to match the total number of questions
assigned in the paper.
3) “Exam Name:” It is used for easily locating a test later. The QClick Software does not use
this information. Therefore, it can be assigned by students to any easily remembered text
title.
4) When these settings are complete, press the “OK/Menu Key”. The homework question
screen will be displayed. Press the “Right Soft Key”, to return to the previous menu.
5) You may start to work on the questions and save the answers to the keypad and then
submit them next day in the class; or just save the question frames to work on later.
2.1.2.2.8 Student’s keypad special functions:
(1) Hardware Test