User's Manual

Copyright © 2009 All Rights Reserved by QOMO HiteVision.
www.qomo.com
18
7 The quiz is loaded and
ready but the timer
has not started. The
student keypad not
previously used for
this test.
Yes Power
Up
No Host Display, need to
search for the class and
register.
8 The quiz is loaded and
ready but the timer
has not started.
Yes Enter
and
send the
answer
Receives the message
“Wait to Start”
9 The quiz is loaded and
running, the timer
started. The student
keypad joined the
class previously.
Yes Power
Up
Registered for the class
and received the register
number. The LCD
displays the register
screen.
10 The quiz is loaded and
running and the timer
started.
Yes Enter
and
send the
answer
Displays “Success!”
message.
Note: Before using your student keypad to join a quiz with the pace controlled by the instructor, you
should understand the function operation from using this table.
To join a quiz, follow these steps:
a) Turn on the keypad power. If the system is at 6 and 9, in the operation form you don’t need
to do anything.
b) If you did not join the class previously, you may have to search for the current class and
register for the class.
c) If you joined the current class previously, you may simply press the Send Key to get a short
cut to directly register for the class.
d) If your keypad ID is not listed in the current class, you may need to set your keypad ID to the
one listed in the class, or try to force a login. The instructor will decide to allow you to
participate.
e) After you registered the class, follow the instructor’s quiz pace.
Attending a quiz with self controlled pace
Note: Before using your student keypad to join a quiz using the self controlled pace, you should
understand the function operation form on the above table before you can begin your quiz.
To join the quiz, follow these steps: