User's Manual

www.qomo.com

2.2.2.4.2 Input screen display:

Operations available under the input menu screen:

Note: The displayed cursor highlighted indicates that the user can input characters.

• User can use the Up Key, Down Key, Left Key or Right Key to move the cursor to

select the desired character or number from the list of valid characters or numbers display.

• Press the Left Soft Key to enter the selection.

• Pressing the Del Key will backspace and remove any entered characters。

• Pressing the Right Soft Key revert to the menu one level up.

• Press OK/Menu Key to select the answer, and press the Left Soft Key to save the

question setting.

2.2.2.4.3 Connecting the instructor’s keypad to the host receiver:

To connect the instructor keypad to the host receiver, follow these steps:

(1) Finding classes

Follow these steps to find classes:

a) Under the NoHost screen, cursor removes on the normal mode and press the OK/Menu Key

to find a list of all classes.

b) Select the normal mode and press the OK/Menu Key under the NoHost Screen to enter into

the main menu. Then select “2.FindingClass” to start searching.

c) A list of classes will be displayed and the nearest class will be listed on the top.

Note: When the search is in progress, pressing any key will cancel the search.

Note: Unlike the student keypad, the instructor keypad can search for a class once the host has

communicated with the PC software. The instructor’s keypad will be notified if no class and/or no

exam has been selected or loaded.

Note: The instructor keypad can logon to any class previously logged into.