User's Manual

www.qomo.com

To upload the session data, follow these steps: (You must have at least one stored session to

upload)

Note: The main receiver and a PC are needed for uploading the session data

1. Plug the main receiver into a PC.

2. Set the QClick software to the Receiving Session Data mode. Refer to Part 3 Software,

3.4.2 Receive Session for detailed instruction.

3. Select the session mode in the instructor keypad. Go to the Loading Info selection screen.

Then select the function Upload Session.

4. The LCD screen will display a list of available sessions.

5. Select the desired session and press the OK/Menu Key.

6. The LCD will display the selected information. Click the OK/Menu Key to confirm or click the

Right Soft Key to quit uploading. After successfully uploading, the session data will not be

purged. To purge the session data, go to the function Session List.

2.2.2.5.3 Class List:

The Class List function provides the list of classes which have been downloaded into the instructor

keypad as well as the selection of classes you desire to delete from the keypad memory in order to

make room for downloading new classes. The maximum number of classes the instructor keypad

can store is 8. To view and delete a class from the class list, follow these steps: