QPC100W 4K Wireless Document Camera User Manual
Wi-Fi Connection Instructions V1.1 Wi-Fi AP Mode Connection 1. Toggle the switch on the side of the unit to the Wi-Fi mode. The Wi-Fi LED indicator will emit a green flashing light. 2.
connection (default: 88889999) to start the connection. 3. When the connection is successful, the Wi-Fi LED indicator will emit a solid green light. 4. Launch the QCapture Pro software and select the mode “Direct Wi-Fi (AP Mode) Connection”.
Please note: When the direct Wi-Fi AP mode is connected, the Internet will be disconnected. WI-FI Client (STA) Mode Connection 1. Toggle the switch on the side of the unit to the Wi-Fi mode. The Wi-Fi LED indicator will emit a blue flashing light. 1.
connection (default: 88889999) to start the connection. 2. Open the web browser and enter the default IP [192.168.100.1] in the address bar. 3. Enter the login account [admin] and default password [9999] and click Login.
5. After logging in to the web page, you can access a live preview and configure the settings on the web page. When the STA mode is configured, launch QCapture Pro software and select the mode “WiFi STA (Client Mode) Connection”.
Web Page Settings Instructions V1.
Web Page Menu Function Description 1. Login Screen No 1 Item User Login Account Function Descriptions Enter user login account (default: admin) 2 User Password Enter user password (default: 9999) 3 Remember user account and password Save user login account and password to the browser.
2.
3.
4. Wi-Fi Setting (Access Point Mode) 1 7 2 3 4 5 6 8 No 9 1 Item Wi-Fi Mode Function Descriptions Select Access Point or Client Mode 2 Wi-Fi 5G/2.4G Switch between 5G / 2.
5. Wi-Fi Setting (Client Mode) 1 2 3 6 No 1 2 3 4 Item Wi-Fi Mode Scan Disconnection Remove 4 5 7 8 9 Function Descriptions Select Access Point or Client Mode Scan nearby wireless network devices Disconnect from current wireless network device Remove the selected wireless network device from the list Click the wireless device and the following image will be displayed.
6. System Network Information 1 No 1 Item Network Function Descriptions The network setting of the QPC100W device. When the DHCP function is closed, click edit to enter edit mode and change the network setting.
7. Maintenance 2 1 3 4 5 No Item Reset to the default value Function Descriptions Select the reset button to resume the factory default setting as the web page setting 2 Reboot Click the reboot button and reboot the device 3 Current Firmware version Display current firmware version 4 Upgrade file path Choose firmware *.
8.
9. About 1 No 1 Item Related Information Function Descriptions Display information about this device.
Supplier's Declaration of Conformity 47 CFR § 2.1077 Compliance Information Manufacturer:QOMO,LLC Product Name:QPC100W Model Number:4K Wireless Document Camera Responsible Party – U.S. Contact Information Supplier:QOMO,LLC 46950 Magellan Drive, Wixom, MI 48393,United States e-mail :support@qomo.com FCC Compliance Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.