Data Sheet

DWM3001C
Fully Integrated UWB Transceiver Module
DWM3001C Data Sheet Rev B, May 2022
Subject to change without notice | All rights reserved
20 of 27
www.qorvo.com
®
10. Regulatory Information
The information below is valid for the DWM3001C module only.
US FCC ID: 2A35D-DWM3001, Canada ISED/IC: 23794-DWM3001
FCC and ETSI Test reports available to download at: https://www.qorvo.com/products/p/DWM3001C
DWM3001C certification approval is valid only for the following UWB RF settings:
Table 14: UWB RF Settings
UWB Parameters
Description
Notes
UWB Channel
Channel 5 (6.5 GHz)
Fixed
UWB Channel
Channel 9 (8 GHz)
Fixed
Data Rate
6.81 Mbps
Fixed
PRF
64 MHz
Fixed
Preamble Length
64
Fixed
Preamble Code
9
Fixed
PHR
850
Fixed
10.1 European Union requirements
10.1.1 Radio Equipment Directive
The DWM3001C Module has been certified for use in European Union countries. A copy of the EU Declaration of Conformity is
available for download on our website.
If these modules are incorporated into a product, the manufacturer must ensure continuing compliance of the final product to the Radio
Equipment Directive 2014/53/EU. The manufacturer must then draw up a new written EU Declaration of Conformity as per RED Article
18.
Furthermore, the manufacturer must ensure the final product does not exceed the specified power ratings, antenna specifications,
and/or installation requirements as specified in this document. If any of these specifications are exceeded in the final product, the
manufacturer must assess whether additional compliance testing is required.
IMPORTANT: The “CE” marking must be in compliance with the RED Article 19. It must be affixed to a visible location on the OEM
product. The CE mark shall have a height of at least 5mm except where this is not possible on account of the nature of the apparatus.
The CE marking must be affixed visibly, legibly, and indelibly.