User Manual Please read the manual of the smart watch carefully before use, so as to install and use it in a correct and easy manner. Due to software upgrades, some functional may be adjusted, please refer to the real products.
1.1 Check whether the model is correct and accessories are complete. 1.2 This smart watch requires a SIM card to uploaded information through 4G/3G/2G network, it is NANO card that which the same as Iphone11. If any question please contact the supplier. 1.3 Band FDD:B1/B3/B7/B8/B20 TDD:B38/B39/B40/B41 WCDMA:B1/B8 GSM:B3/B8 1.4 Choose “Trust” in IOS system by the steps: Setting-general-profile. 2. Packaging 1.A smart watch, 2. A USB cable, 3.A Manual, 3.
Battery Capacity: 600MHA Standby time: 24-48 hours call duration: About 2 hours 4. Functions description 4.1 Power Key Power off state Press 3s to power on(Changing auto Power on) Power on state Press 5s to SOS On call Press to hang up 4.2 Install SIM card open the cover, put SIM card in it. Close in the smart watch. 4.
Use the USB cable charging for device. matters need attention Please ensure that the SIM card has sufficient balance to avoid any inconvenience. The internal entry of the SIM card slot or product may cause a malfunction or malfunction. This product is not able to work outside the power and service area, even registered users. When keeping and using, please avoid the environment with too low temperature or too high, moisture, dust and dust, which can lead to failure.
FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.