Installation manual

PAGE 26
QRS MUSIC TECHNOLOGIES, INC.
Petine
V58.1
...Setup Menu Functions - Advanced...
Te s t 2
This function is not yet available.
Configure Pianomation
The Pianomation Configuration settings determine how
Petine and the piano will respond to MIDI data.
1
All Pianos
General MIDI Piano Sounds 1-6 on channels 1-16 (except 10-drums).
When the Pianomation Configuration is set to “All Pianos” the acoustic
piano keys will play when the MIDI file is written for any of the first six piano
voices.
2
Piano Channel 1
General MIDI Sound 1 (Grand Piano) on Channel 1
When the Pianomation Configuration is set to “Piano Channel 1” the
acoustic piano keys will play when the MIDI music is written for the Grand
Piano, sound patch 1.
3
All Instruments
Piano plays full orchestration except drums and special effects.
When the Pianomation Configuration is set to “All Instruments” the acoustic
piano keys will play when the MIDI file is written for ALL voices.
4
All MIDI
General MIDI Piano Sounds 1-6 are sent to Pianomation, the acoustic piano,
and ALL MIDI data is sent to the MIDI Out socket of the options MIDI
Adapter Cable.
See the “General MIDI Sounds List” section of this manual for the list of General MIDI sounds.
Display
0
0 1
S
c F
S
c F
A
P
-
\
_
n
m 1
1 to 4
n
n 3
0
0 1
v
Range
n
m 1
b
n
m 1
t
U
d
n
m 1
1]
Press STOP to halt play.
2]
Double-Click the ADJ dial.
3]
Press dial, the dot begins flashing.
4]
Rotate the dial clockwise.
5]
Stop at the “n”
6]
Press the dial, the dot is solid.
7]
Rotate the dial clockwise.
8]
Press dial, the dot begins flashing.
9]
Rotate dial to the desired setting.
Double-Click to Select and Exit.
Display
C
0 1
S
c d
S
c d
A
P
-
v
\
_
b
t
U
d
n
2
11
e =
11
e =
11
e =
-
0 1
-
0 5
2
8 5
2
7 3
-
0 5
C
0 1
-
0 6
-
P d
2
7 3
2
5 0
S
t o
11
e =
1]
Press STOP to halt play.
2]
Double-Click the ADJ dial.
3]
Press dial, the dot begins flashing.
4]
Rotate the dial clockwise.
5]
Stop at the “11”.
6]
Press the dial, the dot is solid.
7]
Rotate the dial clockwise.
8]
Press the dial to execute. Please Wait!
9]
This represents piano key #1.
10]
Rotate the dial clockwise to display “05”.
11]
Press the dial do display the key’s force setting.
12]
Rotate dial so key sounds as soft as possible.
13]
Press the dial.
14]
Rotate the dial to select the next, or any, key #.
15]
Repeat steps 11-14 for keys 5-84.
16]
When finished, rotate past key 88 to display “Pd”.
17]
Press the dial.
16]
Rotate dial for a smooth lift of sustain dampers.
17]
Press dial to STORE new settings to processor.
Double-Click to Store and Exit.
New settings aren’t saved unless “Sto” is displayed!
Sets Minimum Key Force / Alignment Test 11
The Test Alignment 11 function allows you to set the minimum
force for each of the keys and the pedal solenoid. The standard
Pianomation system will play keys 5 through 84, the first and last
four keys are not connected. This eliminates the need to cut into
the bass and treble legs. Note: Not all system use a Pedal Solenoid.