Installation manual

For Technical Support Call 1-800-247-6557
Petine V69_1
QRS MUSIC TECHNOLOGIES, INC.
P
AGE 35
...Setup Menu Functions- Advanced...
F-Curves - Change
F-Curves: Default Settings
Audio Master Piano
Source - 1st tap 40 99 01
Source - 2nd tap 95 99 50
Source - 3rd tap 99 99 99
Source - 4th tap Li Li Li
Audio UP Dy Dy Dy
Audio UP Ex Ex Ex
Audio UP
F1
Audio UP
U1
Audio UP U2
Audio UP U3
Audio UP U4
Audio UP
G1
Audio UP G2
Audio UP G3
G4
00 50 75
Source - 5th tap Exit the F-Curve mode
Audio UP
or
With the F-Curves set to “manual” you may now change the volume curves.
Insert a QRS CD, select the CD Source and press PLAY. Use the remote control’s volume buttons to set the following:
Adjust the Master Volume level to “001”; the Audio Volume to “A 0” and the Piano Volume to “P 0”.
Tap the SOURCE button on the Remote control once to access the “low” audio offset level.
Adjust the Audio Volume so that the music from the speaker sounds balanced with the acoustic piano.
Tap the SOURCE button 4 times to exit the F-Curves.
Adjust the Master Volume level to “063”.
Tap the SOURCE button twice to access the “middle” audio offset adjust.
Adjust the Audio Volume so that the music from the speaker sounds balanced with the acoustic piano.
Tap the SOURCE button three times to exit.
Adjust the Master Volume level to “127”.
Tap the SOURCE button three times to access the “high” audio offset adjust.
Adjust the Audio Volume so that the music from the speaker sounds balanced with the acoustic piano.
Tap the SOURCE button twice to exit.
Adjust the Master Volume to a comfortable listening level.
See the previous page to reset the F-Curve activation to “OFF”
P 0 1
C 0 1
0 6 3
A 2 0
P 5 0
A 8 0
C 0 1
1 2 7
P 9 9
a 9 9
C 0 1
0 1 9