Brochure

ManualsBrandsQSC ManualsInstallation Sound6.5" 2-Way AcousticCoverage Loudspeakers

Wide Area Paging ∙ Background Music ∙ Office Buildings ∙ Healthcare Facilities ∙

Concourses ∙ Transportation Terminals ∙ Ancillary Support in Larger Systems

AC-S6T

Features

• High quality transducers provide

exceptional clarity through the

critical voice range.

• Improved musicality often

not seen in typical BGM class

products.

• Ported baffle for increased low

frequency extension down to 70

Hz.

• Low saturation 70/100V

transformers with 8 ohm bypass.

• 4-pole Euroblock connector eases

system wiring.

• Advanced voicing via QSC Intrinsic

Correction™, applied using Q-Sys

processing or CXD amplifier

platforms.

• Available in black (RAL 9011) or

white (RAL 9010)

• Complete EASE, CAD & BIM

information available online

The QSC AcousticCoverage™ AC-S6T is a

surface mounted 6.5” two-way loudspeaker

with 70/100V transformer, suitable for a

wide variety of voice paging and background

music sound reinforcement applications.

AcousticCoverage™ is designed to offer

integrators a cost effective solution for

applications where voice reinforced coverage

is of primary concern, while providing

improved musicality often not seen in

typical BGM class products.

A high quality 165 mm [6.5 in]

polypropylene cone transducer with butyl

rubber surround and a 25 mm [1 in]

aluminium dome tweeter offers pristine

clarity through the critical vocal range for

increased speech intelligibility. With 130

degrees of conical coverage, the AC-S6T

reduces the number of loudspeakers

required for even coverage in close

proximity.

The UV treated high impact ABS enclosure

and ported baffle assembly has been

optimally tuned for added musicality,

creating low frequency extension down to

60 Hz. To maintain this frequency

response, the AC-S6T utilizes a 30-watt low-

saturation and low-loss 70/100V

transformer with varying selectable taps,

including an 8Ω bypass.

To further enhance performance and speed

of install with optimum result, advanced

voicing via QSC Intrinsic Correction

™

techniques are obtainable using Q-Sys

™

networked audio processing platforms,

including CXD amplifiers for a complete QSC

systems solution.

Installers will appreciate the 4-pole

Euroblock connector for loop thru wiring,

located on the rear of the enclosure.

Eliminating the termination hassles of star

topology wiring designs, the generous

Euroblock of the AC-S6T can accept four

18AWG pairs.

The AC-S6T features brass inserts to accept

the included yoke mount and is secured

using the supplied thumb bolts. The grille is

adorned with a spring loaded and rotatable

logo for installation convenience in either

horizontal or vertical deployments.

The AC-S6T is available in white (RAL 9010)

or black (RAL 9011) to match

complimenting QSC product families . The

AC-S6T may also be painted to match any

décor.

To assist in successful systems integration,

complete EASE, CAD, and BIM files are

available for download online.

Small format, surface mount

loudspeaker

AcousticCoverage™ Series

AC-S6T

Summary of content (2 pages)

PAGE 1
AC-S6T AcousticCoverage™ Series AC-S6T Small format, surface mount loudspeaker Features • High quality transducers provide exceptional clarity through the critical voice range. • Improved musicality often not seen in typical BGM class products. • Ported baffle for increased low frequency extension down to 70 Hz. • Low saturation 70/100V transformers with 8 ohm bypass. • 4-pole Euroblock connector eases system wiring.
PAGE 2
AC-S6T Details Beamwidth: Impedance / Frequence Response: Sound Pressure, Level (dB) 200 100 70 95 72 90 64 85 56 80 48 70 32 65 24 60 16 8 55 50 50 500 1k 2k 5k 10k 20 100 200 500 1k 2k 5k 0 20k 10k Frequenc y (H z) Frequency Response (Raw) Horizontal Frequency Response (Intrinsic Correction™) Vertical Dimensions: 50 20k Frequenc y (H z) 7 Impedance, Amplitude (ohm) 300 Beamwidth (-6 dB) (deg) 80 100 400 Impedance (8 Ohm Bypass) 6 5 4 3 Specifications: