Owner's Manual

1675 MacArthur Boulevard • Costa Mesa, CA 92626 • Ph: 800/854-4079 or 714/957-7100 • Fax: [phone]
please recycle
© 2020 QSC, LLC all rights reserved. QSC and the QSC logo are registered trademarks of QSC, LLC in the U.S. Patent and Trademark office and other
countries. All other trademarks are the property of their respective owners. Patents may apply or be pending.
AD-P.HALO Spec Sheet 02/05/2020
AD-P.HALO Details
100 1k 10k
100
90
80
70
60
50
100
80
60
40
20
0
Freq uency (Hz)
Sound pressure, Level (dB)
Impedance (ohm)
20 50 200 500 2k 5k 20k
95
85
75
65
55
90
70
50
30
10
Frequency Response (Raw)
Frequency Response (Intrinsic Correction™)
Impedance (6 ohm bypass)
1k 10k
400
300
200
100
0
Frequency (Hz)
Beamwidth (-6dB) (deg)
200 500 2k 5k 20k
350
250
150
50
Impedance / Frequency Response:
Beamwidth:
Dimensions:
Specifications
System Details AD-P.HALO
LF transducer 165 mm (6.5 in) dual voicecoil subwoofer,
stamped basket,16 Ω nominal impedance,
paper cone, paper dust cap, copper wire,
rubber surround
HF transducer 4x 69.85 mm (2.75 in) full-range,
stamped basket, 16 Ω nominal impedance,
hybrid ceramic/neodymium magnetic circuit,
copper cap, paper cone, inverted aluminum
dust cap, CC aluminum VC wire, rubber
surround
Effective frequency range
1,2,3
40 Hz – 20 kHz
Sensitivity
4
86 dB
Rated noise power
5
100 W
Max noise voltage
5
24.5 V RMS
Coverage
2,7
110° conical
Directivity index
2,7
8 dB
Directivity factor 6
Maximum SPL
(continusous/peak)
6
105 / 111 dB
Nominal impedance 6 Ω nominal
4.9 Ω minimum @ 1.6 kHz
Crossover frequency 250 Hz (2
nd
order low-pass + 3
rd
order high-
pass filters)
Tap power (70 / 100 V) 12.5, 25, 50, 100/25, 50, 100
Port Tuning 50 Hz
Input 4-pin male/female Euroblock with pass-thru
and locking screws
Enclosure material Injection-molded ABS baffle and enclosure
Grille material Stamped steel, perforated and powder-
coated
Net weight 10.2 kg (22.5 lb)
Product dimensions Diameter: 339.7 mm (13.37 in)
Height: 433 mm (17.04 in)
Shipping weight 12.5 kg (27.6 lb)
Shipping dimensions
(W x D x H)
535 x 445 x 435 mm
(21.06 x 17.52 x 17.13 in)
435,6
[17.15]
403,1
[15.87]
Ø346
[13.6]
1
-10 dB from rated sensitivity
2
anechoic chamber @ 2.45 V, 1 m
3
on reference axis
4
from Thiele-Small parameters @ 2.45 V, 1 m
5
IEC, 2 hrs, 6 Ω nominal impedance
6
calculated from rated noise power and
sensitivity
7
500 Hz - 5 kHz average