Owner's Manual

ManualsBrandsQSC ManualsCommercial audio & videoADP-P.SUB

Acoustic Design Series

Quick Start Guide

AD-P.SUB

AD-P.SAT

TD-001564-01

*TD-001564-01*

EXPLANATION OF SYMBOLS

The term “WARNING” indicates instructions regarding personal safety. Failure to follow them may result in bodily injury or death.

The term “CAUTION” indicates instructions regarding possible damage to physical equipment. Failure to follow them may result in equipment damage

to equipment that may not be covered under the warranty.

The term “IMPORTANT” indicates instructions or information that are vital to the successful completion of theprocedure.

The term “NOTE” indicates additional useful information.

The lightning ﬂash with arrowhead symbol in a triangle alerts the user to the presence of uninsulated dangerous voltage within the product’s

enclosure that may constitute a risk of electric shock to humans.

The exclamation point within a triangle alerts the user to important safety, operating, and maintenance instructions in this manual.

1. Read these instructions and keep a copy for future reference.

2. Strictly follow and heed all instructions and warnings.

3. Consult a licensed and qualiﬁed professional engineer to devise and/or review an appropriate pendant mounting scheme.

4. Do not use or submerge this loudspeaker product in or near water or liquids.

5. Clean only with a dry cloth. Do not use any aerosol spray, cleaner, disinfectant or fumigant on, near, or into the loudspeaker product.

6. Do not block any ventilation opening. Install in accordance with the manufacturer’s instructions.

7. Do not install the loudspeaker near any heat sources, such as radiators, heat registers, stoves, or other apparatus (including ampliﬁers).

8. Do not use any attachments, accessories, mounts, or brackets that are not speciﬁed or approved by QSC, LLC.

9. Refer all service to qualiﬁed personnel. Service is required if the hanging mechanism or loudspeaker have been damaged in any way, such as liquid

having been spilled or objects have fallen into the loudspeaker or the loudspeaker has been exposed to rain or moisture, does not operate normally,

or has been dropped.

10. Observe all applicable local codes.

11. Consult a licensed, professional engineer when any doubt or questions arise regarding a physical equipment installation.

Maintenance and Repair

Advanced technology—e.g., the use of modern materials and powerful electronics—requires specially adapted maintenance and repair methods. To

avoid subsequent damage to the equipment, personal injury, and/or creation of additional safety hazards, have all maintenance or repair work on the

equipment performed only by a QSC authorized service station or an authorized QSC International Distributor. QSC is not responsible for any injury, harm,

or related damages that arise from any failure of the customer, owner, or user of the equipment to facilitate those repairs.

Warranty

For a copy of the QSC Limited Warranty, visit the QSC website at www.qsc.com

IMPORTANT SAFETY INSTRUCTIONS

Summary of content (11 pages)

PAGE 1
Acoustic Design Series Quick Start Guide AD-P.SUB AD-P.SAT EXPLANATION OF SYMBOLS The term “WARNING” indicates instructions regarding personal safety. Failure to follow them may result in bodily injury or death. The term “CAUTION” indicates instructions regarding possible damage to physical equipment. Failure to follow them may result in equipment damage to equipment that may not be covered under the warranty.
PAGE 2
Install the AD-P.SUB Subwoofer What’s in the AD-P.SUB Box 1× 1× 1× 8× 3× AD-P.SUB Cover 1 Cover 2 Screw Euro-style plug 2× 1× 1× 1× Hanger cable with slip-lock fastener Magnetic grille Warranty Quick Start Guide TD-001547 Structural member Suspend the Subwoofer WARNING!: Do not attach the snap hook to the loudspeaker or any other load until the hanger cable has been anchored to a suitable structural member. 1.
PAGE 3
WARNING!: Install the system in accordance with local building codes and regulations. Some jurisdictions may require additional suspension points. Use a licensed contractor or professional engineer. QSC is not responsible for damages that result from negligent installation of any bracket, hanger, or loudspeaker. — Figure 4 — Wire the Subwoofer We recommend using insulated twisted pair stranded copper wire of an adequate gauge to minimize resistive losses. To facilitate connection, the AD-P.
PAGE 4
Install the AD-P.SAT Satellite Loudspeakers What’s in the AD-P.SAT Box (Pair Pack) *2× *2× *2× 1× 1× AD-P.SAT Hanger cable with slip-lock fastener Euro-style plug Warranty Quick Start Guide TD-001547 *Quantities marked with an asterisk (*) are doubled in the Master Pack. Suspend the Satellite Loudspeakers Structural member WARNING!: Do not attach the snap hook to the loudspeaker or any other load until the hanger cable has been anchored to a suitable structural member. 1.
PAGE 5
WARNING!: Install the system in accordance with local building codes and regulations. Some jurisdictions may require additional suspension points. Use a licensed contractor or professional engineer. QSC is not responsible for damages that result from negligent installation of any bracket, hanger, or loudspeaker. — Figure 11 — Wire the Satellite From Subwoofer High-Pass Outputs We recommend using insulated twisted pair stranded copper wire of an adequate gauge to minimize resistive losses.
PAGE 6
Mailing Address: QSC, LLC 1675 MacArthur Boulevard Costa Mesa, CA 92626-1468 USA Main Telephone Number: +1.714.754.6175 Sales & Marketing Telephone: +1.714.957.7100 Toll free (USA only) 1.800.854.4079 FAX: +1.714.754.6174 Customer Service Telephone: +1.714.957.7150 Toll free (USA only): 1.600.772.2834 FAX: +1.714.754.6173 E-Mail: service@qsc.com tech_support@qsc.com World Wide Web www.qsc.com © 2018 QSC, LLC. All rights reserved. QSC and the QSC logo are registered trademarks of QSC, LLC in the U.S.
PAGE 7
Gripple Installation A Gripple No.2 wire rope with Snap-On Hook is provided to suspend the Loudspeaker. Attach the hook to the rigging point on the speaker enclosure and thread the wire rope along with the speaker cables through the speaker top cover opening. Lead the opposite end of the wire rope to the structural rigging point and loop through the Grip pie hanger as shown . Installation must comply with all applicable National Electrical Code® guidelines and with the local jurisdictional authority.
PAGE 8
AD-P.SUB AcousticDesign™ Series AD-P.SUB 6.
PAGE 9
AD-P.SUB Details Sound pressure, Level Specifications 80 90 70 85 60 80 50 75 40 70 30 65 20 60 55 10 20 50 10 0 200 5 00 1k 2k 0 F re que nc y (H z) Frequency Response (Raw) Impedance Dimensions n 346 [13.6] n 12,7 [.50] SUSPENSION CONNECTION 2X 2,4 [.09] 33,1 [1.30] 2X n 8,0 [.32] Impedance, Ampl itude (ohm) Voltage, Level (dB) 95 System Details AD-P.SUB LF transducer 6.
PAGE 10
csc·· QSC Hardware Limited Warranty By buying, using and/or installing the QSC Product, you are agreeing to be bound by the terms of the QSC Hardware Limited Warranty ("Warranty") as set out below. Do not use your product until you have read the Terms of the Warranty.
PAGE 11
g. Cosmetic damage, including scratches, dents, and broken plastic, h. Conditions caused by normal wear and tear or otherwise due to the normal aging of the QSC Product, 1. Damage caused by use with another product, J. Product that was purchased from an unauthorized seller or online vendor, or k. Product on which any serial number has been removed, altered or defaced. Other questions regarding this Warranty can be answered by calling: Within US and Canada: + 1(800) 854-4079 Outside the U.