Owner's Manual

AD-S10T Details
100 1k 10k
100
90
80
70
60
50
100
80
60
40
20
0
Frequency (Hz)
Sound pressure, Level (dB)
Impedance, Amplitude (ohm)
20 50 200 500 2k 5k 20k
95
85
65
55
90
70
30
10
Frequenc y Res pons e (Raw)
Frequenc y Res pons e (Intrinsic C orrec tion™)
I mpedanc e (8 Ohm Bypass)
0
-2
-4
-6
-8
-10
-12
1k 10k
90
60
30
0
-30
-60
-90
Sound pressure, Level (dB)
Frequency (Hz)
(deg)
500 2k 5k 20k
Impedance / Frequence Response:Horizontal Contour:
System Details
AD-S10T
Effective frequency range
1
50 – 19k Hz
Rated noise power / voltage
2
250 watts / 45 volts (rms)
Broad-band sensitivity
3
92 dB SPL
Coverage angle (-6 dB) 90°
Directivity factor (Q) 10
Directivity Index 10 dB
Maximum continuous SPL
4
116 dB
Maximum peak SPL
4
122 dB
Rated impedance 8 ohms
Recommended amplifier power 500 watts
Transformer taps 70 V: 100, 50, 25, 12.5 watts and 8 ohm bypass
100V: 100, 50, 25 watts and 8 ohm bypass
HF transducer 1” exit / 1.4” voice-coil compression driver
LF transducer 10” weather resistant paper cone woofer,
2.5” / 64 mm voice-coil
Input connector type Euroblock connector with parallel output
Enclosure material Painted ABS polymer
Grille material Powder coated aluminum
X-Mount material Powder coated aluminum
Enclosure Details
Ingress protection IP-54
Operating environment Designed for indoor and outdoor use
Testing The AD Series loudspeakers qualified for
outdoor use using the following tests:
Salt fog: MIL-STD-810G Method 509.5 for
100 hrs.
Humidity: MIL-STD-810G Method 507.5,
Natural cycle B2, cyclic high RH for 7 days
High and low temperature: tested to QSC
internal standards between -20° and 50° C
Operating Temperature Range -20 to 50 °C / -4 to 122 °F
Net weight 31 lb / 15 kg
Product dimensions 20.3” x 12.5” x 11.7” (516 x 318 x 298 mm)
Shipping weight 40.6 lb / 18.45 kg
Shipping dimensions 31.7” x 16.1” X 16.1” (805 x 409 x 409 mm)
Included accessories X-Mount mounting system, euroblock connector,
input panel cover
Optional accessories YMS10T yoke mount, M10 Kit-C
1
Free-field, -10 dB from on-axis sensitivity
2
IEC60268-1 noise signal for 2 hours
3
On-Axis, free-field sensitivity, 2.83V, 1 m
4
Calculated from rated noise voltage and sensitivity
Dimensions: Specifications:
298 mm (11.7 in)
516 mm (20.3 in)
318 mm
(
12.5 in
)
298 mm (11.7 in)
318 mm (12.5 in)
516 mm (20.3 in)
As part of QSC’s ongoing commitment to product development, specifications are
subject to change without notice.
1675 MacArthur Boulevard • Costa Mesa, CA 92626 • Ph: 800/854-4079 or 714/957-7100 • Fax: [phone]
AD-S10T Spec Sheet 06/08/2014
please recycle
© 2014 QSC Audio Products, LLC. All rights reserved. QSC and the QSC logo are registered trademarks of QSC Audio Products, LLC in the U.S. Patent and Trademark office
and other countries. DMT, Intrinsic Correction, and X-Mount are trademarks of QSC.