User guide

ManualsBrandsQSC ManualsComputer equipmentAP-5102

AcousticPerformance (AP)

User Guide

AP-5102 — 10" Two-way Trapezoidal Loudspeaker with 105˚axisymmetric coverage

AP-5122 — 12" Two-way Trapezoidal Loudspeaker with 90˚axisymmetric coverage

AP-5152 — 15" Two-way Trapezoidal Loudspeaker with 75˚axisymmetric coverage

AP-5122m — 12" Two-way Multi-purpose Loudspeaker with 90˚axisymmetric coverage

*TD-000369-00*

TD-000369-00-B

EXPLANATION OF SYMBOLS

The term “WARNING!” indicates instructions regarding personal safety. If the instructions are not followed the result may be bodily injury or death.

The term “CAUTION!” indicates instructions regarding possible damage to physical equipment. If these instructions are not followed, it may result in

damage to the equipment that may not be covered under the warranty.

The term “IMPORTANT!” indicates instructions or information that are vital to the successful completion of the procedure.

The term "NOTE" is used to indicate additional useful information.

The intent of the lightning ﬂ ash with arrowhead symbol in a triangle is to alert the user to the presence of un-insulated "dangerous"

voltage within the product's enclosure that may be of sufﬁ cient magnitude to constitute a risk of electric shock to humans.

The intent of the exclamation point within a triangle is to alert the user to the presence of important safety, and operating and

maintenance instructions in this manual.

IMPORTANT SAFETY INSTRUCTIONS

WARNING!:

While it is possible for one person to lift a loudspeaker, it is important to use proper lifting techniques. Suggested

reading: OSHA Technical Manual on Back Disorders and Injuries

(http://www.osha.gov/dts/osta/otm/otm_vii/otm_vii_1.html#app_vii:1_2).

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• Do not use this apparatus near water.

• Clean only with a dry cloth.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliﬁ ers) that produce heat.

• Only use attachments/accessories speciﬁ ed by the manufacturer.

• Refer all servicing to qualiﬁ ed service personnel.

• Adhere to all applicable, local codes.

• Consult a licensed, professional engineer when any doubt or questions arise regarding a physical equipment installation.

Summary of content (8 pages)

PAGE 1
AcousticPerformance (AP) User Guide AP-5102 — 10" Two-way Trapezoidal Loudspeaker with 105˚axisymmetric coverage AP-5122 — 12" Two-way Trapezoidal Loudspeaker with 90˚axisymmetric coverage AP-5152 — 15" Two-way Trapezoidal Loudspeaker with 75˚axisymmetric coverage AP-5122m — 12" Two-way Multi-purpose Loudspeaker with 90˚axisymmetric coverage EXPLANATION OF SYMBOLS The term “WARNING!” indicates instructions regarding personal safety.
PAGE 2
Warranty (USA only; other countries, see your dealer or distributor) QSC Audio Products 3 Year Limited Warranty QSC Audio Products, LLC (”QSC”) guarantees its products to be free from defective material and/or workmanship and will replace defective parts and repair malfunctioning products under this warranty when the defect occurs under normal installation and use, provided the unit is returned to our factory, one of our authorized service stations or an authorized QSC International Distributor via pre-paid
PAGE 3
Shock Loading When a load is either moved or stopped, its static weight is magnified. Sudden movements can magnify the static weight several times. This magnification of static weight is called "shock loading". Shock loading poses a danger to equipment and workers. The effects of shock loading can be instantaneous, or may remain undetected unless the equipment is visually damaged. Proper preparation for shock loading requires careful planning and knowledge of equipment, suspension, and lifting practices.
PAGE 4
Using Yoke Mounts M10 Cap Screw Split Washer Washer AcousticPerformance Loudspeakers can be installed using a yoke mount attached to the M10 Integrated Suspension Points. A 6 mm hex key is required. • Model AP-5102 (10") uses the AP-YM10 Yoke Mount Hex Plug Pads • Model AP-5122 (12") uses the AP-YM12 Yoke Mount • Model AP-5122m (12" multi-purpose) uses the AP-YM12m Yoke Mount NOTE: The AP-5122m mounts perpendicular to the yoke. Refer to Figure 2.
PAGE 5
Connections AcousticPerformance Loudspeaker are capable of switching between Passive and Bi-amp mode. Look at the Setting ports to determine the current mode. Yellow in the Setting port indicates the current mode. Refer to Figure 3 and Figure 4 NOTE: The default mode, from the factory, is the passive crossover network.
PAGE 6
Wiring the AcousticPerformance Loudspeaker WARNING!: Make sure the amplifiers are turned off, and disconnected from the power source, or the loudspeaker wiring is not connected to the amplifiers. Refer to Figure 7, Figure 8, and Figure 9. The pin numbers for the NL4 connector correspond to the pin numbers on the barrier strip. Model AP-5122m utilizes NL4 connectors only.
PAGE 7
Specifications AP-5102 AP-5122 AP-5152 AP-5122m 60 Hz —18 kHz 48 Hz — 18 kHz 44 Hz — 18 kHz 55 Hz — 18 kHz Power Capacity (Continuous) Passive Bi-amp HF Bi-amp LF 54 V / 450 W 25 V / 80 W 54 V / 450 W 60 V / 550 W 25 V / 80 W 60 V / 550 W 65 V / 650 W 25 V / 80 W 65 V / 650 W 60 V / 550 W 25 V / 80 W 60 V / 550 W Nominal Sensitivity 2 94 dB, 1 W @1 m 95 dB, 1 W @1 m 96 dB, 1 W @1 m 95 dB, 1 W @1 m Nominal Coverage Angle (Axisymmetric) 105˚ 90˚ 75˚ 90˚ Directivity Factor (Q) 4.
PAGE 8
Mailing Address: QSC Audio Products, LLC 1675 MacArthur Boulevard Costa Mesa, CA 92626-1468 USA Telephone Numbers: Main Number: (714) 754-6175 Sales & Marketing: (714) 957-7100 or toll free (USA only) (800) 854-4079 Customer Service: (714) 957-7150 or toll free (USA only) (800) 772-2834 Facsimile Numbers: Sales & Marketing FAX: (714) 754-6174 Customer Service FAX: (714) 754-6173 World Wide Web: www.qscaudio.com E-mail: info@qscaudio.com service@qscaudio.com © 2013 QSC Audio Products, LLC.