Spec sheet

E Series Details
1
With QSC Processing.
2
Power that the device can withstand for two hours without permanent change in acoustical, mechanical, or electrical characteristics, greater than 10%, using IEC60268 noise based on nominal
impedance in the cabinet with Xover, full range 30 Hz 12 dB/oct.
Specications are subject to change without notice.
Specifications:
E10 E12 E15 E18SW
Configuration 1 x 10-inch, 2-way,
non-powered
1 x 12-inch, 2-way,
non-powered
1 x 15-inch, 2-way,
non-powered
1 x 18-inch, subwoofer,
non-powered
Frequency Response (-6 dB) 68 Hz - 20 kHz 64 Hz - 20 kHz 55 Hz - 20 kHz 37 Hz - 230 Hz
Frequency Range (-10 dB) 50 Hz - 20 kHz 46 Hz
1
- 20 kHz 43 Hz - 20 kHz 32 Hz - 230 Hz
Power Capacity
2
: Continuous/Peak 300 W / 1200 W 400 W / 1600 W 500 W / 2000 W 800 W / 3200 W
Sensitivity 95 dB, 1 W @ 1 m 96 dB, 1 W @ 1 m 97 dB, 1 W @ 1 m 98 dB, 1 W @ 1 m
Coverage Angle 85° conical DMT 85° conical DMT 75° conical DMT N/A
Output (Peak SPL @ 1M) 126 dB 128 dB 130 dB 133 dB
Drivers
LF
HF
254 mm (10-inch) driver with
64 mm (2.5-inch) voice coil;
25 mm (1-inch) exit, 45 mm
(1.75-inch) voice coil,
compression driver
305 mm (12-inch) driver with
76 mm (3-inch) voice coil
25 mm (1-inch) exit, 45 mm
(1.75-inch) voice coil,
compression driver
381 mm (15-inch) driver with
89 mm (3.5-inch) voice coil
38 mm (1.5-inch) exit, 71 mm
(2.8-inch) voice coil,
compression driver
457 mm (18-inch) driver with
102 mm (4-inch) voice coil
N/A
Nominal Impedance 8 Ω 8 Ω 8 Ω 4 Ω
Cross-over Full-range only, 1.8 kHz Full-range only, 1.8 kHz Full-range only, 1.55 kHz Recommended 80 - 120 Hz LPF
Input Connectors 2 x NL4 1 x barrier strip 2 x NL4 1 x barrier strip 2 x NL4 1 x barrier strip 2 x NL4 1 x barrier strip
Enclosure Multi-angle, plywood, black
texture paint finish. One top
mounted handle.Perforated,
powder-coated steel grille
with foam lining.
Trapezoidal, plywood, black
texture paint finish. Two side
mounted handles. Perforated,
powder-coated steel grille with
foam lining.
Trapezoidal, plywood, black
texture paint finish. Two side
mounted handles. Perforated,
powder-coated steel grille with
foam lining.
Rectangular, plywood, black
texture paint finish. Four side
mounted handles. Rear panel
provision for optional casters.
Perforated, powder-coated steel
grille with foam lining.
Mounting and suspension 6 x M8 suspension points, dual
angle, 35 mm pole-socket
6 x M8 suspension points, dual
angle, 35 mm pole-socket
6 x M8 suspension points, dual
angle, 35 mm pole-socket
M20 threaded pole mount
socket.
24" (610 mm) pole included.
Net Weight 20 kg / 44 lbs 23 kg / 51 lbs 31 kg / 68 lbs 43 kg / 95 lbs
Shipping Weight 23 kg / 50 lbs 26 kg / 57.5 lbs 34 kg / 75 lbs 48 kg / 106 lbs
Deployment: