User Manual

11
TD-001536-01-A
System Power Sequencing
Proper power turn on/turn off sequencing can help to prevent unexpected sounds from being produced by the system
(pops, clicks, thumps). Always follow the rule that speakers are “last on, first off”.
Power-On Sequence:
1. Bring the output level control of the mixer (or other audio source) feeding your loudspeaker speaker loudspeaker
system to its minimum position.
2. Turn on all source devices (CD players, mixers, instruments).
3. Turn on the KS Series subwoofers,
4. Turn on the “top-boxes”.
5. The level controls on your mixer may now be brought up.
Power-Off Sequence:
1. Turn off “top boxes.”
2. Turn off the KS Series subwoofers
3. Turn off all audio source devices.
NOTE: If a KS Series subwoofer is being driven from the output of another KS Series Subwoofer, it should
be turned on after the unit feeding it signal, and turned off before the unit feeding it signal.
Block Diagram
— Figure 9 —
Input A
Line In
Line Thru
Input B
Line In
Line Thru
Signal
Signal
Gain
User
Crossover
User
Delay
Protection
Limit
LF
Amp